The robot sees what it picks.
Camera and gripper recognise parts in the bin, on the conveyor or on the stack, even when they arrive unsorted and every one looks different.
Singulating parts is manual work nobody enjoys.
Parts arrive as bulk in a mesh box, mixed on the conveyor or stacked by the supplier. Before the next machine can process them, someone sorts them by hand. That ties up people, often across several shifts, and becomes a bottleneck as soon as new variants are added.
- Staff load or reposition parts by hand
- Machines wait because nobody refills them
- Every new variant needs a new fixture
- Monotonous, physically demanding work
What the system takes over.
Pick parts from a bin, even when they lie in a jumble
Bin picking
Take parts off the conveyor and place them in the right orientation
Singulation · pick & place
Load machines automatically
Machine tending
Identify parts before picking and check for visible defects
Vision inspection
Teach new variants through data instead of new fixtures
CAD-based recognition
How it works.
- 1
Detect
A 2D or 3D camera captures the position and orientation of the parts.
- 2
Plan the grip
The software picks the most accessible part and a collision-free grip.
- 3
Pick
The robot picks the part with a gripper designed for it: vacuum, parallel, magnetic or custom.
- 4
Place & report
The part lands in the machine, load carrier or conveyor in the right orientation. EVI knows which part went where.
For automation and IT.
Vision
2D and 3D cameras, selected by part size, surface and cycle time. Recognition based on CAD data or trained patterns.
Robot & gripper
Industrial robot or cobot, depending on payload and environment. We design the gripper for your parts and test it with original parts.
Integration
Handover to the machine control via fieldbus or OPC UA. Order and part data come from EVI.
Frequently asked.
Does it work with shiny or very different parts?
Reflective, transparent or highly variable parts are demanding. We test detection and grip with your parts before we commit.
How much effort is a new variant?
If CAD data is available, a new variant can usually be added through data rather than a new fixture. We agree the exact approach using your parts.
Do we need EVI for this?
No, the cell also runs on its own. With EVI it receives its orders directly and reports back what it has picked.
Which parts should the robot pick?
Send us photos or samples of your parts and the cycle time you need. We will tell you whether and how they can be picked.
Enquire now